SJE PumpMaster®

Mechanically-Activated, Wide-Angle Pump Switch

pump master float switch

Pump switches provide automatic pump control.

The SJE PumpMaster® pump switch is designed to directly control pumps up to 1/2 HP at 120 VAC and 1 HP at 230 VAC in water and sewage applications.

The SJE PumpMaster® pump switch is not sensitive to rotation or turbulence, allowing it to be used in both calm and turbulent applications.

Check out the new SJE PumpMaster® Quick Fit pump switch – the float and piggy-back plug are separate to allow for a quick fit installation. Watch the video below to learn more.

pump master float switch

Features

  • Heavy-duty contacts
  • Controls pumps up to 1/2 HP at 120 VAC and 1 HP at 230 VAC
  • Adjustable pumping range of 7 – 36 inches (18 -91 cm)
  • Includes standard mounting clamp and boxed packaging
  • SJE PumpMaster® pump switch on/off position diagram

PumpSwitch On/Off Diagram

Options:
  • For pump up or pump down applications as specified by part number
  • With a 120 VAC or 230 VAC piggy-back plug
  • Without a plug for direct wiring in 120 VAC or 230 VAC applications
  • In standard cable lengths of 10, 15, 20, or 30 feet (3, 5, 6, or 10 meters) – longer lengths available
UL Recognized, CSA Certified
Five-Year Limited Warranty

Specifications

CABLE:
  • Flexible 16 gauge, 2 conductor (UL, CSA) SJOW, water-resistant (CPE)
FLOAT:
  • 3.05 inches diameter x 3.56 inches long (7.75 x 9.04 cm) high impact, corrosion resistance, PVC housing for use in sewage and water up to 140°F (60°C)
ELECTRICAL:
  • 120 VAC 50/60 Hz Single Phase:
    • Maximum Pump Running Current: 13 amps
    • Maximum Pump Starting Current: 85 amps
    • Recommended Pump HP: 1/2 HP or less
  • 230 VAC 50/60 Hz Single Phase:
    • Maximum Pump Running Current: 13 amps
    • Maximum Pump Starting Current: 85 amps
    • Recommended Pump HP: 1 HP or less

NOTE: This switch must be used with pumps that provide integral thermal overload protection.

A Pump Switch is designed for Horsepower (HP) rated loads and is not suitable for control (pilot duty) applications. It will fail prematurely when switching loads less than 1 Amp at 120 VAC. Select a float switch from our Control Switch offering for control applications.

.

Looking for support
or purchase information?

Contact us