SJE VerticalMaster®

International Version

vertical master

The SJE VerticalMaster® pump switch is designed to directly control pumps up to 1/2 HP at 120 VAC and 1 HP at 230 VAC in non-potable water and sewage applications with limited space. It works well in small sump chambers, effluent applications, and laundry trays, as well as in large tanks.

The SJE VerticalMaster® pump switch is not sensitive to turbulence and is available for pump down applications only.

vertical master

Features

  • Heavy-duty contacts
  • Controls pumps up to 1/2 HP at 120 VAC and 1 HP at 230 VAC
  • Adjustable pumping range of .75 – 6.5 inches (2 – 17 cm)
  • Includes standard boxed packaging
  • SJE VerticalMaster® Pump Switch Diagrams

vertical master diagram

Options:
  • With a 120 VAC or 230 VAC piggy-back plug
  • Without a plug for direct wiring in 120 VAC or 230 VAC applications
  • In standard cable lengths of 10, 15, 20, or 30 feet (3, 5, 6, or 10 meters) – longer lengths available
UL Recognized, CSA Certified
Five-Year Limited Warranty

Specifications

CABLE:
  • Flexible 16 gauge, 2 conductor (UL, CSA) SJOW or SJTOW, water-resistant (CPE)
MOUNTING BRACKET & HOSE CLAMP:
  • Stainless steel
LIFT ROD:
  • Injection molded acetal plastic
FLOAT STOP:
  • Neoprene
SWITCH AND FLOAT HOUSING:
  • High impact, corrosion resistant, PVC housing for use in sewage and non-potable water up to 125°F (52°C)
  • Overall Dimensions:
    • 12 inches high x 5 inches x 3 inches wide
      (30.5 cm high x 12.7 cm x 7.6 cm wide)
  • Switch Housing Dimensions (not cable entrance):
    • 2 inches high x 2.8 inches wide
      (5 cm high x 7.1 cm wide)
  • Float Housing Dimensions:
    • 2.3 inches high x 2.7 inches wide
      (5.8 cm high x 6.9 cm wide)
ELECTRICAL:
  • 120 VAC 50/60 Hz Single Phase:
    • Maximum Pump Running Current: 13 amps
    • Maximum Pump Starting Current: 60 amps
    • Recommended Pump HP: 1/2 HP or less
  • 230 VAC 50/60 Hz Single Phase:
    • Maximum Pump Running Current: 12 amps
    • Maximum Pump Starting Current: 60 amps
    • Recommended Pump HP: 1 HP or less

NOTE: This switch must be used with pumps that provide integral thermal overload protection.

Downloads

Available Downloads
Visit our downloads section of this website for additional literature.

library

.

Looking for support
or purchase information?

Contact us