SJE-Rhombus International Product Overview

Products

Product Overview - International

International products are distributed outside the United States and Canada.

SPECIAL APPLICATIONS	DESCRIPTION
SP6R Level Controller	Simple, easy-to-use microprocessor-based controller monitors any 4-20 mA signal. It has six programmable relay outputs that can be used for control and alarm. The transducer input zero and span are fully configurable. A simulation mode allows the user to test the set points and relay operation. Also available in a NEMA 4X enclosure. Call for details.
SP6R-LSC Lift Station Controller	Simplicity at its best. This easy-to-use microprocessor-based controller monitors the level in the wet well via a submersible pressure transducer or any other device with a 4-20 mA signal output. The SP6R-LSC displays level set points, pump run time, pump cycle count and actual level. In addition, it provides pump alternation and has a simulation feature. It can be configured for pump down or pump up applications. Also available in a NEMA 4X enclosure. Call for details.
SJE-Rhombus Pro-Line or Engineered Custom Control Panels	Built specifically for your application, whether a basic or state-of-the-art industrial grade control system. Please call or fax in your specifications for a quote.

Wide-Angle PUMP SWITCHES	APPLICATION	HP RATINGS	MAX PUMP START AMPS/ RUN AMPS	PUMPING RANGE
SJE VerticalMaster® II (mechanically activated)	Provides automatic pump operation in confined areas. For water and sump applications.	No rating	10/60 125 VAC 10/60 250 VAC	2 to 17 cm
SJE VerticalMaster® (mechanically activated)	Provides automatic pump operation in confined areas. For water and sump applications.	1/2 HP at 120V 1 HP at 230V	13/60 120 VAC 12/60 230 VAC	2 to 17 cm
SJE MicroMaster® (mechanically activated)	Provides automatic pump operation in potable water, sump and sewage applications. Not sensitive to rotation or turbulence. SPDT version can be wired to work in either pump up or pump down applications.	No rating	10/60 125 VAC 8/60 250 VAC	20 to 91 cm
SJE MicroMaster® SPDT (mechanically activated)		No rating	10/60 125 VAC 8/60 250 VAC	20 to 91 cm
SJE MicroMaster® Plus (mechanically activated)	Provides automatic pump operation in potable water, sump and sewage applications. Not sensitive to rotation or turbulence. Can be wired to work in either pump up or pump down applications.	No rating	13/78 125 VAC 13/78 250 VAC	20 to 91 cm
SJE PumpMaster® (mechanically activated)	Provides automatic pump operation in potable water and sewage applications. Not sensitive to rotation or turbulence.	1/2 HP at 120V 1 HP at 230V	13/85 120 VAC 13/85 230 VAC	18 to 91 cm
SJE PumpMaster® Plus (mechanically activated)	Provides automatic pump operation in potable water and sewage applications. Not sensitive to rotation or turbulence.	3/4 HP at 120V 2 HP at 230V	15/85 120 VAC 15/85 230 VAC	18 to 91 cm
SJE PumpMaster® SPDT (mechanically activated)	Can be wired to provide automatic pump up or pump down operation in potable water and sewage applications.	1/2 HP at 120V 1 HP at 230V	13/85 120 VAC 13/85 230 VAC	18 to 91 cm
SJE AmpMaster® (mechanically activated)	Provides automatic control of grinder and high head sewage pumps.	1.5 HP at 125V 3 HP at 250V	20/120 125 VAC 20/120 250 VAC	23 to 61 cm
Junior Super Single® (mercury activated)	Provides automatic pump operation in sump, sewage and water applications.	1/2 HP at 120V 1 HP at 230V	13/40 120 VAC 8/20 230 VAC	16.5 to 48 cm
Super Single® (mercury activated)	Provides automatic pump operation for sump and sewage pumps, solenoids and relays. Not sensitive to rotation or turbulence.	1 HP at 120V 2 HP at 230V	15/55 120 VAC 2/35 230 VAC	17 to 34 cm
Double Float® (mercury activated)		1 HP at 120V 2 HP at 230V	15/55 120 VAC 12/35 230 VAC	4.45 to 122 cm wider ranges available

Narrow-Angle CONTROL SWITCHES	APPLICATIONS	CONTROL DIFFERENTIAL>	ELECTRICAL RATING	MOUNTING OPTIONS
SJE SignalMaster® (mechanically activated)	Activates alarms, control panels, solenoids and relays.	Approximately 4 cm above or below horizontal	5 amp 125V or 250V	Mounting Clamp Cable Weight
SJE SignalMaster® SPDT (mechanically activated)	Activates alarms, control panels, solenoids and relays.	Approximately 4 cm above or below horizontal	5 amp 125V or 250V	Mounting Clamp Cable Weight
Sensor Float® (mercury activated)	Activates alarms, control panels, solenoids and relays.	Approximately 1 cm above or below horizontal	5 amp 120V or 230V	Mounting Clamp Internal Weight Cable Weight
Sensor Float® Mini (mercury activated)	Activates alarms, control panels, solenoids and relays.	Approximately 1 cm above or below horizontal	5 amp 120V or 230V	Mounting Clamp Cable Weight
SJE MilliAmpMaster™ (mechanically activated)	Activates low current alarms and control panels.	45 degrees above or below horizontal	Down to 0.160 mA at 125 VAC	Mounting Clamp Cable Weight

Liquid Level ALARM SYSTEMS	APPLICATIONS	ENCLOSURE	VOLTAGE	OPTIONS
Tank Alert® AB	Designed to monitor liquid levels in lift pump chambers, sump basins, holding tanks and water systems.	NEMA 1 (indoor)	120V 60 Hz or 9 VDC battery backup (not included)	Alternate float switches available
Tank Alert® I - 230V	Designed to monitor liquid levels in lift pump chambers, sump basins, holding tanks and water systems.	NEMA 1 (indoor)	230V 50/60 Hz	Alternate float switches available
Tank Alert® I - 120V	Designed to monitor liquid levels in lift pump chambers, sump basins, holding tanks and water systems.	NEMA 1 (indoor)	120V 50/60 Hz	Alternate float switches available
Tank Alert® XT-240V (Includes Alarm Auto Reset)	Designed to monitor liquid levels in lift pump chambers, sump basins, holding tanks and water systems.	Meets Type 3R water-tight standard	220-240V 50/60 Hz	Alternate float switches available, alarm auxiliary contacts, terminal block
Tank Alert® XT-120V (Includes Alarm Auto Reset)	Designed to monitor liquid levels in lift pump chambers, sump basins, holding tanks and water systems.	Meets Type 3R water-tight standard	120V 50/60 Hz	Alternate float switches available, alarm auxiliary contacts, terminal block
Tank Alert® 4X (Includes Alarm Auto Reset)	Designed to monitor liquid levels in lift pump chambers, sump basins, holding tanks and water systems.	NEMA 4X (indoor/outdoor)	120V 50/60 Hz	Alternate float switches available, alarm auxiliary contacts

ACCESSORIES	APPLICATIONS	ENCLOSURE	OPTIONS
JB Plugger	Provides convenient wiring connection for pump station applications.	NEMA 4X (indoor/outdoor)	Includes 120V or 208/240V receptacle for pump, pump switch and terminal strip for alarm system connections
Junction Boxes	Provides convenient location to connect all wiring required for a typical pumping station, on-site system or other electrical installations.	NEMA 4X (indoor/outdoor)	Sizes include: 10.16 x 10.16 x 11.43 cm 15.24 x 15.24 x 11.43 cm 20.32 x 20.32 x 11.43 cm
Cable Weight	Provides an accurate pivot point for suspended float switches.
Cable Connectors	Provides strain relief and a liquid-tight seal for electrical cable.		Round or flat connectors available
Hub Assembly	Convenient connector for a conduit run.		Sizes include: 2.54 cm, 3.81 cm and 5.08 cm
Cord Seal	Provides strain relief and a liquid-tight seal.
Float Bracket	Provides a convenient location for securing both internally and externally weighted floats.		Six or four Float Bracket available