SJE-Rhombus
{rsMainGraphic.title}

SJE-Rhombus Featured Product

 

  • Product Info
  • Features
  • Specs
  • Downloads

EZconnex™ Float Switch Connection System

Revolutionary Float Switch Connection System Saves Installers Time and Money

Manifold/float connection system designed for easy installation of float switches

The EZconnex Float Switch Connection System includes an electrical wiring manifold with mounting bracket and hardware. The manifold features three quick release float switch connection ports. A single 6-conductor direct burial cable has Red-Blue-Yellow wire pairs that match the R-B-Y imprint on the manifold housing for easy field wiring. The system is rated for short term water submersion. The mounting bracket is designed to allow quick access to the manifold and float switches for easy maintenance.

EZconnex™ float switches feature an internal switching mechanism with sealed gold cross-point contacts for reliable low current operation. A range of wide-angle or narrow-angle float switches feature a quick release connection that simply plugs into the manifold port(s) for easy installation.

The EZconnex™ system can be used with 1, 2, or 3 float switches. Each float switch includes a protective rubber boot that provides a dual seal design for an extra layer of protection to keep connections clean and dry. Sealing plugs are available for unused manifold port(s). NOTE: Do not install with open port(s).

 

EZconnex™ Float Switch Connection System

  • (3) Quick release float connection ports
  • A single 6 conductor direct burial cable with shield
  • Housing is imprinted with R-B-Y that matches Red-Blue-Yellow cable wire pairs for easy float identification
  • Rated for short term water submersion
  • Includes mounting bracket with hardware
  • Designed for use with EZconnex™ float switches (not included with manifold; float switches must be ordered separately):
    • Low current applications down to 0.160 mA at 125V
    • Mechanically-activated, snap action contacts
    • Quick release float connection simply plugs into manifold port(s)
    • Colored caps for easy identification of Normally Open (blue cap) or Normally Closed (red cap) models
    • Activation angle above/below horizontal:
      4" (10.16 cm) wide-angle; 1.5" (3.81 cm) narrow-angle
    • Each float switch includes a protective rubber boot that provides a dual seal design for an extra layer of protection to keep connections clean and dry
  • CSA Certified
  • Five-year limited warranty

 

EZconnex™ Float Switch Connection System

MANIFOLD SPECIFICATIONS:
Cable: Direct Burial Shielded PVC Type TC-ER TFFN (UL) 600V
     18 gauge, 6 conductor
HOUSING: ABS Plastic
ELECTRICAL:
125 VAC Maximum Electrical Load:
     1 amp per connection port

FLOAT SPECIFICATIONS:
CABLE: flexible 18 gauge, 2 conductor (UL, CSA) SJOW, water-resistant (CPE)
FLOAT: 2.74 inch diameter x 4.83 inch long (7.0 cm x 12.3 cm), high-impact, corrosion resistant, polypropylene housing for use in sewage and water up to 140o F (60o C)
MAXIMUM WATER DEPTH: 30 feet (9 meters), 13 PSI (90kPa)
ELECTRICAL:
125 VAC Maximum Electrical Load:
     1 amp, Minimum Electrical Load: 0.160 milliamps
30 VDC Maximum Electrical Load:
     1 amp, Minimum Electrical Load: 0.160 milliamps
5 VDC Minimum Electrical Load:
     1 milliamp

USA  French Canadian  Chinese

French  German  Italian  Spanish